Submersible Axial Flow Pumps for Flood Control and Irrigation
Release time:
Nov 19,2026
HENGDA JIANGHAI builds the submersible axial flow pump for projects that need to move a large volume of water at a low head. The pump is used in flood control, municipal drainage, irrigation and water treatment work. In this article we explain how the unit is put together, which duty range it covers and what a buyer should check before placing an order.
A Coaxial Motor and Pump Unit
The pump and the motor share one shaft line. There is no gearbox, belt or long transmission shaft between them, so the mechanical transmission losses that appear in a separate drive arrangement are removed. The whole unit is designed as one mechanical and electrical assembly and is lowered into the water as a single piece.
The hydraulic section follows the national uniform design model. That choice keeps the hydraulic passage close to a proven shape and makes the pump interchangeable with traditional units of the same duty. For a project that is replacing an older pump, this can reduce the work needed at the station.
The motor is sealed from the water and the unit uses multiple mechanical seals. A seal arrangement with more than one stage gives the motor an extra barrier if the first seal is worn. Stable and reliable operation depends on the seals, the bearings and the cooling path all working together.
Capacity, Head and Power Range
The published working range starts at a capacity of 490 cubic meters per hour and runs up to 46000 cubic meters per hour. The head range is 0.88 meters to 25 meters. Motor power runs from 7.5 kW to 1400 kW, and the supply voltage can be ordered from 380 V up to 10 kV.
The pump is intended for a liquid temperature of 50 degrees Celsius or below. A buyer with a warmer medium should raise the question before the order, because the motor insulation and the seal materials have to suit the actual temperature.
The duty point should be fixed first, then the motor power and the voltage chosen for the site supply. Do not select the largest model by habit; select the model that meets the flow and head with a sensible margin.
Where the Pump Is Used
The page lists six application groups. They are water conservancy flood control and waterlog drainage, municipal water supply and drainage, power station water supply and drainage, eco environmental water treatment, agriculture irrigation and sewage treatment. All six use the same low head high flow principle, but the installation and the control system can differ.

For flood control, the pump has to start quickly and run reliably during a storm. For irrigation, it may run for long hours at a steady duty. For a municipal station, it may work with a screen, a gate and a control cabinet. Our team can review the station layout so the pump, the discharge pipe and the control system are matched.
Station Design and Service
The page states that the pump station building structure is easy. A compact submersible unit does not need a long shaft or a separate motor floor, so the civil work can be simpler than a dry installed vertical pump station. The discharge connection, the lifting arrangement and the access for service still need to be planned at the design stage.
Multiple mechanical sealing also means the seal set should be checked on a service schedule. Keep the seal condition, the motor insulation and the cable entry in the maintenance plan. If the pump is lifted for inspection, record the wear ring clearance and the impeller condition so the next service has a reference.
Ask for the installation drawing and the control cabinet diagram for the model you select. Confirm the cable length, the protection class and the starting method against the site supply. If the station has a variable water level, state the lowest and highest level so the pump position and the operating range can be checked.
Other Products and Contact
Alongside this pump, the company lists a mining explosion proof submersible pump, a submersible propeller pump, a submersible sewage pump, a submersible tubular pump, an intelligent control system for submersible electric pumps and submersible motors in dry stator and wet stator versions. Each duty should be checked on its own flow and head.
To request a quotation, send the required flow, the required head, the supply voltage, the liquid temperature and the installation position. State whether the pump is for flood control, drainage, irrigation or another duty, and include the station drawing if one is available.
You can reach HENGDA JIANGHAI by phone at +86 551 6520 5211 or by WhatsApp at 86 18855151696. The address is No 2 Xifeihe Road, Shuangfeng Industrial Zone, Hefei City, Anhui Province, China. We will reply to a complete inquiry with the model, the price and the delivery plan.
Previous page:
More News
Choosing the Right Axial Flow Propeller Pump for High Flow and Low Head
Nov 18,2026
Image Source: statics.mylandingpages.co Axial flow propeller pumps suit duties that demand very high flow rates against minimal lift. These axial propeller pumps move thousands of gallons per minute at low head and discharge pressures. An axial flow propeller pump delivers high capacities within the large capacity low head envelope. Matching
Top Trends Shaping Submersible Propeller Pump Technology
Nov 17,2026
Image Source: statics.mylandingpages.co Advanced materials and coatings, hydraulic optimization, IoT monitoring and smart controls, variable frequency drives, high-efficiency motors, renewable energy integration, and application-specific designs rank among the top trends in submersible propeller pump technology. These innovations reshape per
Smart Features Revolutionizing Large Explosion Proof Submersible Pumps
Nov 16,2026
Image Source: statics.mylandingpages.co IoT sensors, predictive analytics, and automated safety controls lead the revolutionary trends in explosion-proof submersible pump safety in 2026. These smart submersible pumps strengthen explosion-proof submersible pump safety in hazardous zones and reduce operational costs. Real-time compliance monit
How Large Submersible Mine Pumps Are Evolving This Year
Nov 15,2026
Image Source: statics.mylandingpages.co The submersible large volume pumps market shifts fast in 2026. Large submersible mine pumps now feature efficient motors, optimized hydraulics, tougher wear alloys, and smarter controls. Stricter safety and environmental rules also shape designs. These advances deliver reliable dewatering, more uptime,
Mixed Flow Submersible Pumps for Industrial Use Pros and Cons
Nov 14,2026
Image Source: statics.mylandingpages.co A mixed flow submersible pump excels in high-flow, medium head industrial duties. It is not the best fit for very high-head or abrasive-solids applications. These mixed flow pumps offer high flow capacity, energy efficiency at moderate heads, a compact flood-proof design, and versatility across water-h